The
CFR TRADING POST

CFR Parts For Sale or Trade:

Need? Sell? Engines or Parts:
View This Page of Engines & CFR Engine Parts,  Octane, Supercharge, Cetane
"For Sale" or Items "Wanted"       
EMAIL JOHN or Guestbook


Not affiliated with Waukesha Motors Corp. See Standard Disclaimer
This page is for Everyone in CFR, Worldwide, & it's FREE.
 

WELCOME TO THE "AD FREE" RUNYARD.ORG SERVER

Updated 03/12/2017

 
MKES:
Mark's Knock Engine Service

Overhauls, Repairs &
Certified Installer for the A.E.T. IQT
OCTANE ENGINE Services: Byron Knight
Available to repair, service or install your CFR equipment.
New Build:
New low Cost Digital-Timing-Indicator
by Istvan Antal
OctaneEngines.com

Waukesha CFR Engine Servicing
and Training
Advanced Transportation Associates
Octane Engine Services

Knock Engine Services LLC
Website momentary out of service.

 

CFRIS LLC
Innovative Instrumentation Services:
Knock Meter Repairs

Ted's Back!
StanCo Scientific inc.
CFR Meter and Controller Repair

Refinery Systems ( Core Labs )
 
ESD Inc. - Laboratory and
On Line Octane Analyzers
"Home of the
OCTAMATIC"
Fuels and Lubes Technologies



FOR SALE:


 
FOR SALE: New Digital Timing Indicator

New Build:
An alternative to the high priced units:___LINK_HERE:


Contact: Istvan Antal
Email: antal.sistra@gmail.com 

Posted: 2/3/2017


 
FOR SALE: 1969 CFR 48 Mon
 
Ex. University of Calgary Fuel Testing Department.
Appears to be set up for gas octane calibration.
Total Time: 1749: Time since top overhaul: 575 Hrs. Voltage: 240/440/60 Htz.
Complete less ice -tower; inlet air heater; inlet air tube; and expansion exhaust system.
One warm up fuel bowl, Four bowl selector fitted.
Accessories as original for this year except for detonation pick up sensor.
Visual bore scope of internal cylinder carried out. Cylinder and piston appear normal.
Oil filter element and oil appear clean.
For sale “AS IS”. No warranty implied or expressed.
Unit may be inspected and boxed and shipped by arrangement.
Currently in Alberta Canada.

Please direct enquiries to : Byron Knight: byronknight@clear.net.nz

Posted: 04/04/2016


 
SOLD: REFURBISHED CFR F1 -F2 COMBO OCTANE ENGINE

Refurbished CFR Octane Engine: Crankcase overhauled with Waukesha Overhaul Kit; Induction Motor serviced and will be setup for the buyers 60hz voltage (220v or 440v); New 501C Detonation Meter; Current Carburetor with Combo Bowls; Cylinder; D1 Pickup; Compression Ratio Change Motor. This engine will be equipped with Waukesha RTD’s, digital temperature display for Oil, Condenser, Intake Air and Mixture Temperatures and Temperature Controller to include 300˚ thermistor and 125˚ thermistor.

This engine is equipped to be a “Combo” Knock Engine for use as either D2699 Research Octane Number or D2700 Motor Octane Number unit. This engine is complete from the bedplate up. Not included is the concrete foundation block, exhaust surge tank, exhaust and ice tower/air refrigeration unit and duct work. Shipping and packaging are not included.

Contact: Tom:  Thank you, it's been sold.


Posted: 3/19/2016 to February, 2017


Click for Larger image


 
For Sale:        SOLD                                                                 Posted Sept. 28th, 2014

I have for sale a refurbished 1971 Waukesha CFR 48 (MON and RON). The engine serial # is 210000, the console serial # is G-25158 supplemented with a fully Automatic Octane Blender unit.

Istvan Antal    E-mail: ---sold Feb. 2015 ---

For Sale: in December, 2013

ENLARGE
I would just like to sell the load bank.
Engine not for sale at this time.

This load bank was with our 1957 CFR engine with attached DC Dyno Motor. It operates on 250 VDC. It drives/absorbs power from a 230 VDC electric motor rated at 3.75 HP at 600 RPM and a maximum speed of 1250 RPM. We drive the dyno motor with a modern motor controller now. The gauge that indicates power is missing, but everything else seems to be complete. I'lL entertain any offers especially F1/F2 cylinder parts. We do not have any more room to store this and I do not want to see it scrapped. I do not have much information on this part, but it appears to have come with the engine.

I did not know how rare that the CFR engine with attached dyno motor was. Mark at MKE engines said that he had only seen one such engine. If you would like any information on our setup for curiosity sake, feel free to ask. I have attached a picture of the current setup. Our engine is currently setup with Megasquirt fuel injection, in cylinder pressure measurement, intake flow measurements, and full emissions testing equipment. 

Thanks,
Jackson Wolfe 

Contact: Jackson Wolfe
Email:jwolfe14@mix.wvu.edu
Phone 304-293-8737

 

FOR SALE:       SOLD:                                                Posted in November. 2013

I'll have for sale in November a 1948 High Speed Ron/Mon which has done 3000 hrs only.
Including two near new cylinders, a refigerated air cooling unit, a modern console and electronic ignition.
All dimensions within new book figures.
Set up for USA 60 htz, but could possibly convert to 50 htz as have some parts.

Contact Byron Knight in Masterton, New Zealand e-mail byronknight@clear.net.nz  


FOR SALE:       SOLD                                               Posted 03/24/2011


Click for more
Photos



Here's one for the collector. A 1938 Waukesha Low Speed CFR Engine.
This one has a cetane head and some modifications.
From UC Berkeley, California. ( located San Francisco Ca. )
Eight more photos HERE.

Contact: removed, unit has sold. Photos remain as reference. Thank you... The Management.

 

 

FOR SALE:
Fuels and Lubes Technologies, LLC now offers octane and cetane engine cylinder
reconditioning. We have experience dating back to 1981. Our prices are reasonable
and our turnaround time is like no other. Basic cylinder reconditioning complete with
ISO style reporting documentation begins at $800. Additional charges of course for
shipping,cylinder boring and parts replacement.

Top end overhauls and on site training
services are also available.

Fuels and Lubes Technologies,LLC
John Chovanes
152 McLafferty Road
Fenelton, Pa 16034
Office: 724-282-8264
Cell: 724-355-3043

www.fuelsandlubestechnologies.org
Posted: 2/15/2010


 

FOR SALE:                                               Posted 10/6/2009


Click Image
for more
Photos

 

FOR SALE:  SOLD

name = Mark Janson
email = SORRY, SOLD
comments = I have been authorized by the Dean of Mechanical Engineering
to sell our Research Octane Engine from Waukesha Engine.
Nameplate Data:
Co-operative Research Unit
Serial # G-7852
Fuel Research Engine
Built 1-64 serial # 58015

The unit was fully functional when it was put in storage about 30 years ago.

 


 

FOR SALE:            SOLD                                                     Posted 10/28/2008

name = Jeremy
Military fuel lab, enclosed in a military semi trailer. It is equipped with a Waukesha Fuel Research engine, manufactured in April of 1969. I have not run this engine, it does turn over good. It seems to be a complete engine.
email me.
This fuel lab is located in Utah.
 

 

FOR SALE:                                                                        Posted 12/10/2006

From:  Zac Planski
Email = zac@surplusstar.com

 I have a 501-c Knockmeter in nice condition.

 


CLICK FOR LARGER VIEW

FOR SALE:  ~ Best Offer:  SOLD                     Posted 7/7/2006   SOLD Here 9/2007

Low Speed Crankcases (2) & one Cylinder Head, plus extra parts.
Best Offer. St. Louis area. Must pick up.
( Perfect setup for Old Engine Collectors ) ( Waukesha manufactured the original design from 1930 to 1948 )

John Donovan
 


1947 WAUKESHA CFR ENGINE
CLICK FOR LARGER VIEW

FOR SALE:    SOLD Here 2/2004                    Posted 1/25/04 

1947 WAUKESHA CFR ENGINE
( Hi-Speed Crankcase)
Research Method with accessories: Base, Console, Intake Refrigeration /
Chiller.
Contact: ARTIE BRANCH"     ***-***-*****
              NORTH CAROLINA, USA

 


CLICK FOR LARGER VIEW
FOR SALE:    SOLD Here on the CFR Trading Post                        Posted 3/21/02 

We have three engines we'd like to sell. Motor, Research & Supercharge.
( 48 Crankcase )
Southern California. Contact Mike Barranco at ***-***-*****
 

1958 CFR MOTOR METHOD,  log shows 11,107 hours since 1989

 

CLICK FOR LARGER VIEW
FOR SALE:    SOLD Here on the CFR Trading Post                        Posted 3/21/02 

CFR RESEARCH METHOD:
Research is dated 3-1959.  log shows 16,570 hours since 1982.
( 48 Crankcase )
Contact Mike Barranco at ***-***-*****
 

 

CLICK FOR LARGER VIEW
SECOND VIEW
FOR SALE:    SOLD Here on the CFR Trading Post                        Posted 3/21/02 

Supercharged is dated 12-1954, and shows 2,730 hours.
( 48 Crankcase )
Core Labs installed (rebuilt?) it in 1990.
Contact Mike Barranco at ***-***-*****
 


 


 

CLICK FOR LARGER VIEW
I have a 1968 Waukesha CFR 48 (Motor Method) engine out in my barn. It is complete and has only 220 hours.
In dry storage since 1977. It turns fine and is complete.

CLICK FOR LARGER VIEW
It ran when it was taken out of service. The engine serial # is 149124 and the console serial # is G-18833. Both are dated by Waukesha as1968.
$10,000 / Make offer. Contact Bob Noiseux at ***-***-****

Sorry, this engine is SOLD here, as of 4/22/01.

FOR SALE:                                   List Your CFR Wants, Needs, Sell or Trade Here
 

If you don't see your AD within 5 days, Please resend, as it was overlooked
and was buried in a small mountain of email.
Email John


 


-----  PARTS WANTED  -----
 


PARTS WANTED:

Waukesha, Used, Octane/Cetane COOLANT CONDENSER ASSEMBLY
INCLUDES ITEMS 1-17 
REFER TO F1/F2 PARTS BOOK - PAGE 29
P/N : O109264C
qty : 1

Contact Ankita Deshmukh
Email: eshmuk1@purdue.edu


   ( Posted 06/25/2013 )

 

PARTS WANTED:

Waukesha, Detonation meter 501C
P/N : A111263B
qty : 1

Contact Rita
Email:  renata.rita@yahoo.com


   ( Posted 03/04/2011 )

 

PARTS WANTED:

501-C part # A111263B
Pickup Cable part # AC210109A

Contact KAM
Email: ceo@torlab.ca
415 424 424 7

   ( Posted 11/07/2010 )

 

PARTS WANTED:

We are looking for a set of Ron & Mon Engines in good working condition.

Best Regards,

AMOL AA
GEO CHEM MIDDLE EAST
P.O.BOX 5778 , TECHNOLOGY PARK ,
DUBAI , UAE
TEL: 00971 4 886 7400
FAX: 00971 4 886 7401 / 02
www.geo-chem.com/terms.htm      Email:
Amol@geochem.ae

   ( Posted 09/12/2010 )

 

PARTS WANTED:

Anyone have cylinders for a CFR engine? Any condition will be considered to purchase.

Thanks, Mike Garcia <
mgarcia.mike@gmail.com>

 ( Posted 03/19/2010 )

 

PARTS WANTED:

"Wanted: ignition system, air heating system, detonation meter, a used
complete CFR F1/F2 engine

Contact - Tien Mun Foong (t.foong@pgrad.unimelb.edu.au)"

 ( Posted 03/19/2010 )

 

PARTS WANTED:

Here with I represent my company PT. Advanced Engineering Services, we currently doing an International project.
The project it self is a Condensate Fractionation Plant EPC Project and located in Bangladesh.
For the mentioned project we will need a CFR engine for Octane and Cetane Number test that we hope you can help us to find..

I have found through the internet that you are able to help people to find CFR Engines.
So could you please let us know if any one can supply u the new CFR Engines?
Our client more prefer the new one but they may still can accept low hour used equipment.
The test lab for this refinery product it self will be located in Bangladesh , so we do hope that we can find the seller not so far away.
Even though at this time anywhere is still possible.
So we hope that you can kindly inform us if there is any information about the CFR Engines available.
Thank you very much for your time and support to us.

Best regards,
Irvan Riadi

Advanced Engineering Services
Karawaci Office Park
Kompleks Ruko Pinangsia
Blok I / 21
Tangerang 15811
Banten, Indonesia
Office : +62 21 5527283
Mobile : +62 817 335277

"Irvan" irvan@advanced-eng-serv.com

 ( Posted 01/15/2010 )

 

PARTS WANTED:

item removed 5/31/2011

 ( Posted 12/12/2009 )

 

PARTS WANTED:

name = Johan
email = johan@e-analytics.co.za
comments =  Hi,
I need the following please,
Cetane:
Meter dual complete assembly,(807-47)
Fuel injection assembly (A106941G)
Base oil filter (111345)
Handwheel assembly,

Many thanks
Johan

 ( Posted 10/28/2009 )

 

PARTS WANTED:

name = Aaron
email = jnwilson330@sbcglobal.net
comments = looking for used motors D2699 & D2700 for sale.

 ( Posted 10/01/2009 )

 

PARTS WANTED:

name = your name here
email =
comments = What you're looking for. List yours HERE

 ( Posted 10/01/2009 )

 

PARTS WANTED:

name = alex morgan
email = venamek@gmail.com
comments = LOOKING FOR: Used  Waukesha CFR F-2U Combination Research/Motor Method (F1/F2) Octane Engine System.

 ( Posted 10/26/2008 )

 

PARTS WANTED:

Need Misc. lab equipment. I started my own business, but the new prices are killing me. Might anyone out there have any reasonably priced, older style petroleum lab testing equipment? I could use an RVP setup, KF water, Saybolt and ASTM color,etc.



Contact:
John Chovanes
Email:  jscjed@aol.com


 ( Posted 09/12/2008 )

 

PARTS WANTED:

Wanted: Complete engine or components. Any version, high speed, low speed or 48.
Will pay reasonable prices.
I am a small time operation. Also I am available to assist you with engine build ups or repairs.


Contact:
John Chovanes
Email:  jscjed@aol.com


 ( Posted 08/01/2008 )

 

PARTS WANTED:

Name:  Dean Boland
 
Email:
  dean.boland@inspectorate.com

comments = Looking for Cetane Engine to purchase. Any condition considered.
PH# 925-372-0958.

 ( Posted 05/10/2008 )

 

PARTS WANTED:

Name:: Andy Trinder
 
Email: andy.trinder@inspectorate-fujairah.ae

Today's Date:: 12/21/07
Location:: Dumas Texas

Comments...:I'm looking for a second hand, preferably refurbished Cetane Engine.

 ( Posted 12/24/2007 )

 

PARTS WANTED:

Name:: Yun Li
 
Email:: yli@worcestertechnology

Today's Date:: 12/08/07
Location:: Dumas Texas

Comments...: We are looking for a used Waukesha CFR F1/F2 engine. If anyone has one for sale or know
where I can buy one. Please let me know. It will be greatly appreciated.
Ph: 774-262-2283
Fax: 419-831-4501

 ( Posted 12/24/2007 )

 

PARTS WANTED:

Name:: Antonio Trinidad
 
Email:: apr24@windstream.net

Today's Date:: 08/13/07
Location:: Dumas Texas

Comments...: I am looking for a console for a gasoline engine. Know anyone who has one for sale reasonably priced?

 ( Posted 6/29/2007 )

 

PARTS WANTED:

I’m looking for the above used octane engine to be used in the middle east
Can you please advise me if its available with you or any place where I can buy them
Your help will be highly appreciated
Thank you

Essa Rashid AlMaani
Laboratory Superintendent
Oman Refinery Company LLC
Tel: + (968 )24570894
Fax: + (968)24570875
E-mail: e.maany@refinery.co.om




 ( Posted 05/26/2007 )

 

PARTS WANTED:

Name = Angelos

Email = eg_yota@yahoo.com

Comments = Kindly we need garrett turbo charger for waukesha Engine: l6670DSI
Date: 4/27/07
Type: 109300
Turbo OE No: 465790-0003
Type: T18A93
OEM: 207773c
The items required
1- Complete turbo 465790-0003
2- CHRA 409095-0010


 ( Posted 5/9/2007 )

 

PARTS WANTED:

Name = mostak

Email = mostak@globalctg.net

Date: 4/23/07
Comments = We are looking CFR Engine with compete set immediately.

Md Mostaque Ahmed
Malik Enterprise
17-4 BSCIC BHABAN
AGRABAD C/A, CHITTAGONG
4100 BANGLADESH
Phone- 880 1819 634 000

 ( Posted 5/9/2007 )

 

PARTS WANTED:

Name =
Camin Cargo Control, INC.

Email = Skennedy@camincargo.com

Comments = Looking for a 3-4 bowl carb. set & spare cylinders. 

Scott Kennedy

Camin Cargo Control, Inc

www.camincargo.com

 ( Posted 2/28/2007 )

 

PARTS WANTED:

Name =
Nick Edmond

Email = nick@rich-mond.com

Comments =   Waukesha Mon and Ron CFR Engines needed asap.

 ( Posted 2/14/2007 )


 

PARTS WANTED:

Name =
Enrique De Vinatea

Email =
edvinatea@esan.org.pe

Need: Waukesha, model F1/F2 Combination Octane Rating Unit for Use in Performing ASTM D2700 "Motor Method". Second hand.

Please, sent us a e-mail.

Regards

Enrique De Vinatea

Manager

 ( Posted 2/3/2007 )

 

PARTS WANTED:

Name = yandam inc,

Email = fyandam@yahoo.com

Need we need to buy detonation meter model 501-c please collect at 614 439 6555


 ( Posted 12/22/2006 )

 

PARTS WANTED:

From:  Jim

Email = cjosby@yahoo.com

 Will puy used CFR engine and parts.


 ( Posted 10/30/2006 )

 

PARTS WANTED:

From:  Charlotte Layton

email = clayton@amref.com

Need BA111666 Connecting Rod Assembly


 ( Posted 3/27/2006 )

 

PARTS WANTED:
 


 ( Posted 9/2012 )


PARTS WANTED:

We are looking for a decent second hand
Waukesha CFR F1/2 octane testing engine.

name = Olszowski
email = jolszowski@jshamiltonpoland.com

 ( Posted 10/02/2003 )

UPDATE: 2/21/2007, comments = WE ARE STILL LOOKING FOR A USED CFR OCTANE ENGINE. 


List Your CFR Wants, Needs, Sell or Trade Here
 

Created April 4, 2001
 
Updated 03/12/2017

Hit Counter


BACK to John's Octane Page or use,
www.johnrunyard.com
 

 

Comments: Drop John a line.
EMAIL JOHN or Guestbook


Translate this page into Spanish using FreeTranslation.com